Documentation Center
Figure 10: Powering the gateway using PoE
Access the Gateway
In this section, several ways of accessing the gateway are provided to have different alternatives for you to choose
from depending on the availability of the requirements needed.
⚠
WARNING
Do not power the device if the LoRa antenna port has been left open to avoid potential damage to the
RAK7289 V2 WisGate Edge Pro.
Wi-Fi AP Mode
By default, the gateway will work in Wi-Fi AP Mode, which means that you can find an SSID, named
"RAK7289_XXXX" on your PC's Wi-Fi Network List. "XXXX" is the last two bytes of the Gateway MAC address.
To access the Web Management Platform, input the IP Address 192.168.230.1 in your Web browser.
