Documentation Center
Figure 40: Advanced join settings for OTAA mode
📝
NOTE:
For this example, these settings will be left as default.
11. Finally, to finish registering your device, click Add end device.
Configuring the Device in OTAA Mode
1. For configuring the node, you will need the following three parameters: Device EUI, Application EUI, and
Application Key. You can see them all on the Device Overview page. But since the two EUI's come with the
device, you only need the Application Key from there.
Figure 41: OTAA device parameters
2. Using the RAK Serial Port Tool, set the join mode, device class, and your LoRaWAN region to your correct
frequency band, with the following set of AT commands:
For the join mode (OTAA):
