Documentation Center
Figure 34: Basic settings for OTAA mode
4. Fill in the Basic settings for the device:
End device ID - This is the unique identifier for your RAK7204 WisNode Sense Home in your application.
You need to enter this manually. The End device ID must contain only lowercase letters, numbers, and
dashes (-).
AppEUI - The AppEUI uniquely identifies the owner of the end device. It is provided by the device
manufacturer. To get the AppEUI, connect your device via USB cable to your computer. Open RAK Serial
Port Tool, choose the correct COM port and BaudRate, and run the following command:
Figure 35: AppEUI of the device
DevEUI - The unique identifier for this end device. It can be found on a sticker on the back of the device.
at+get_config=lora:status
