Documentation Center
End device name (optional) - A unique, human-readable identifier for your device. You make it up, so be
creative. Device IDs cannot be used by multiple devices within the same application.
End device description (optional) - Optional end device description; can also be used to save notes about
the end device.
5. Click Network layer setting.
Figure 36: Network layer setting for OTAA mode
6. Here you must configure the Network layer settings for the device:
Frequency plan - The frequency plan used by the end device. Note that, for this tutorial, the frequency plan
used is Europe 863-870 MHz (SF9 for RX2 – recommended).
Regional Parameters version - The Regional Parameters specify frequency, dwell time, and other
communication settings for different geographical areas. The Regional Parameters version is the version of the
LoRa Alliance specification which your device supports. This should be provided by the device manufacturer in
a datasheet. For this example, PHY V1.0.2 REV B is chosen.
LoRaWAN class capabilities – Here you can select if your device supports Class B, Class C, or both.
7. In Advanced settings, you can configure additional settings for your device.
Figure 37: Advanced network layer settings of the device
