Documentation Center
Figure 16: WisBlock Core silkscreen on the RAK5005-O Base Board
WisBlock Sensor
📝
NOTE:
The RAK1910 GPS module must be installed only on the front side of the RAK5005-O Base Board. The
RAK1910 is a full-length module that uses the space of two WisBlock IO modules.
A WisBlock Sensor module is designed to be installed on the Sensor slot of the RAK5005-O Base Board. There
are four (4) available sensor slots in the RAK5005-O Base Board, two (2) on each side of the Base Board. As
shown in Figure 17, the location of the slots is properly marked by silkscreen.
Follow carefully the procedure of the section ,
attaching a WisConnector
, to attach a WisBlock Sensor module.
Once attached, fix the module with an M1.2 x 3 mm screw.
Figure 17: WisBlock Sensor silkscreens on the RAK5005-O Base Board
WisBlock IO