RAK RAK5005-O, Быстрый старт, Страница: 10 / 10

Documentation Center
Figure 23: Solar Panel Connection
⚠
WARNING
Only 5 V solar panels are supported. Do not use 12 V solar panels. It will destroy the charging unit and
eventually other electronic parts.
The GND pin of the Solar Panel Connector is located on edge of the board. Make sure the Solar Panel
wires are matching the polarity on the RAK5005-O board.
The full specification of the Solar Panel Connection can be found on the datasheet of the WisBlock Base.
Software Setup
The WisBlock Core is designed to be interfaced with other WisBlock Modules like sensors, displays, and other
interfaces. To make useful devices, you need to upload a source code to the WisBlock Core. Before you continue,
you should have either an
Arduino BSP or PlatformIO already setup .
WisBlock Examples Repository
To quickly build your IoT device with less hassle, example codes for WisBlock Core are provided.
You can access the codes on the WisBlock Example code repository . The example codes on folder
common
are compatible with RAK4631 and RAK11200 WisBlock cores.
Last Updated: 11/15/2021, 11:46:55 AM