Documentation Center
Figure 12: Correct way: Applying even forces to detach the header from the socket
2. Avoid pulling out the header asymmetrically in the long-side direction.
Figure 13: Wrong way: Applying uneven forces to detach the header from the socket
3. The short-side of the connector can be pulled out asymmetrically, but apply the force vertically and avoid
rotating the header.
Figure 14: Wrong way: Do not rotate the header
4. Avoid applying forces in a single corner.
Figure 15: Wrong way: Do not apply force in a single corner of the header
Assembling a WisBlock Module
WisBlock Core
A WisBlock Core module is designed to be installed on the CPU slot of the RAK5005-O Base Board. As shown in
Figure 16, the location is properly marked by silkscreen. Follow carefully the procedure defined in
attaching a
WisConnector
section in order to attach a Core module.
Once attached, fix the module with one or more pieces of M1.2 x 3 mm screws depending on the WisBlock Core.