Documentation Center
Figure 33: Add end device
Figure 34: Manually register device to The Things Stack
3. At this step, you need to put a unique End device ID and DevEUI, as shown in Figure 35. Check if your
module has a DevEUI on sticker or QR that you can scan, then use this as the device unique DevEUI.
Optionally, you can add a more descriptive End device name and End device description about your device.
4. After putting all the details, click Network layer settings to proceed to the next step.
📝
NOTE:
It is advisable to use a meaningful End device ID, End device name, and End device description that will
match your device purpose. The End device ID
rak-device-abp
is for illustration purposes only.