Documentation Center
📝
NOTE:
Once you have the application in The Things Stack (TTN V3), you need to ensure that you are in coverage
of a LoRaWAN gateway that is registered to The Things Stack (TTN V3) as well. Without the coverage of
that LoRaWAN gateway, you cannot activate any device that you will register in your application.
RAKwireless has
that you can connect to The Things Stack (TTN V3) if no
LoRaWAN gateway coverage is available in your location.
The Things Stack OTAA Device Registration
1. Go to your application console to be able to register a device. To start adding an OTAA end device, click + Add
end device, as shown in Figure 21.
Figure 21: Add end device
2. To register the module, you need to click first Manually then configure the activation method by selecting Over
the air activation (OTAA) and compatible LoRaWAN version, then click the Start button, as shown in Figure
22 and Figure 23.