Documentation Center
Figure 1: RAK4260 Module Connection
2. Any serial communication tool can be used. However, it is recommended to use the
.
3. Configure the serial communication tool by selecting the proper port detected by the computer and configure
the link as follows:
Baud Rate: 115200 bauds
Data Bits: 8 bits
Stop Bits: 1 stop bit
Parity: NONE
4. The RAK4260 console output can now be read in the RAK serial port tool, as shown in Figure 2.
Figure 2: RAK Serial Port Tool Connected to RAK4260 Module
Before establishing a LoRa Connection using the RAK4260 Module, several configurations must be set first, which
will be discussed in the next sections.
Connecting to the Things Network (TTN)
In this section, a practical exercise will be performed to show how to connect the RAK4260 module to The Thing
Network (TTN) platform.
