Raisecom Gazelle S1020i-LI, Руководство пользователя

Страница: 35 / 71

Raisecom
Gazelle S1020i-LI (A) User Manual
2 Hardware structure
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
24
Parameter Description
Insulating sheath Halogen-free flame-retardant heat-shrink tubing. It is a 20
mm plastic tube which shrinks when being heated.
Welding technology The conducting wire and OT terminals adopt solderless
pressed connection.
Error in length of
conducting wire ±5 mm
Table 2-20 lists technical specifications of the OT terminal.
Table 2-20 Technical specifications of the OT terminal
Parameter Description
Model Grounding round-pressed terminal (M6)/RoHS
Technical specifications
 4.3 soldering lug
 Inner diameter of soldering lug: 6.4 mm
 Outer diameter of soldering lug: ≤ 12 mm
 Inner diameter of sheath: 3.4 mm
 Thickness of soldering lug: ≥ 1 mm
Cross-sectional area of
the conducting wire
12–10 AWG (4–6 mm
2
)

The Gazelle S1020i-LI is delivered without the ground cable. If required, make the
ground cable on site according to technical specifications.
 The ground cable cannot be longer than 30 m and should be as short as possible;
otherwise, a ground bar should be used instead.
2.7.2 Console cable
Introduction
The Console cable is used to connect the Console interface of the Gazelle S1020i-LI to the
RS-232 serial interface of the console. It transmits configuration data signals. The console
locally debugs and maintains the Gazelle S1020i-LI through the Console interface.
Connector types of the Console cable are below:

RJ45 connector: connect the Console interface on the Gazelle S1020i-LI.

DB9 female interface connector: connect the serial interface on the console.
Appearance
Figure 2-12 shows the RJ45 console cable.