RAIS Visio 100 RD, Руководство по установке

Страница: 34 / 60

34
GB
INSTALLATION INSTALLATION
REMOTE CONTROL
In this section you can learn how to set up the remote
control for the gas fireplace.
The remote control uses 2 x AAA 1.5V batteries.
Never use pointed tools to remove the batteries from
the receiver and remote control.
The signal range between the remote control and the
gas fireplace must not exceed 10 metres.
SYNCHRONISATION OF THE REMOTE CONTROL
AND RECEIVER
1. Press and hold the receiver's “reset” button until
you hear a short ‘beep’ followed by a long ‘beep’
(see the arrow).
2. After the second beep, release the reset button.
You now have 20 seconds to press the “down ar-
row” button on the remote control. Hold the but-
ton in, until you see the word “conn” on the remote
control. Then release the button.
3. The remote will then count to 8 and two short
beeps will sound from the receiver. The receiver
and remote control are now synchronised, and the
fireplace can be lit.
See the separate User Manual for remote control
options
and a guide for the PUCK.
Remote control
Receiver
SYNCHRONISE THE REMOTE
CONTROL
Scan the QR code
to watch a how-to-video
NOTE!
Once a year you should replace the batteries in the
remote to ensure optimal operation. Replace all the
batteries at the same time and use only good quality
alkaline batteries.
USER MANUAL
Scan the QR code
to see the user manual