37
Q-Tee II C SST USA
Demounting the vermiculite
8286509
2
3
1
4
5
5
6
Q-Tee II C SST USA
Demounting the vermiculite
8286509
2
3
1
4
5
5
6
Q-Tee II C SST USA
Demounting the vermiculite
8286509
2
3
1
4
5
5
6
US
REMOVING THE COMBUSTION CHAMBER LINING
MAX LOAD
The maximum allowable amount of fire-
wood is marked with a series of holes in
the back plates. This means that firewood
may only be filled up to this row of holes.
The combustion chamber lining protects the body of
the fireplace insert from the heat of the fire. The large
differences in temperature can lead to cracks in the
combustion chamber lining. This will not affect the func-
tionality of the fireplace insert. The lining will only need
be replaced after several years of use when it begins to
disintegrate. The liner panels are easy to place in position
in the fireplace insert and can easily be replaced by you or
your dealer.
Procedure for removing the combustion chamber lining:
Remove the two steel pins (1) to remove the baffle plate
(2). Then remove the smoke deflector plate (3) by pulling it
forward and tilting it so that it is free of the vertical plates.
The smoke deflector can now be carefully removed.
2. Remove the base plates (4).
3. Loosen the side plates (5) by turning
the front end of the plate towards the
center of the stove. Then take them
out carefully.
4. Remove the back plates (6) by
pulling the side of the plates for-
ward and out.
When the combustion chamber
liner is to be reassembled, do so
in reverse order.
