RAIS 2:1, Инструкция по установке, использованию и техническому обслуживанию

Страница: 22 / 36

ENGLISH RAIS - manual for Rais 2:1
22 April 2014
Control
If the ash is white and the walls in the combustion chamber are soot free after the stove
has been used, the air regulation was set correctly and the wood was sufficiently dry.
Using the wood burning stove
When using the Rais 2:1, it is important that the amount of wood does not exceed the
“MAX LOAD” marking pressed into the vermiculite sides of the fire chamber, approxi-
mately 19cm height.
Adjusting the air damper. The damper has 3 settings.
Position 1
The damper is almost closed meaning that there is a
minimal air intake.
Position 2
Pull / push the lever until the first click. This position
gives full secondary air.
During normal use the lever is set between position 1
and 2.
When the flames are clear and yellow, the damper is
set correctly, i.e. resulting in a slow/optimal burning.
Position 3
Pull / push the lever until the next click.
The air damper is completely open and gives full
primary and secondary air. This position is for the light-
ing stage and is not used under normal operation.