RAIS/attika Q-Tee II GAS Скачать руководство пользователя страница 11

Страница: 11 / 91

Installation

It is important that the stove is correctly installed from both an environ-

mental and safety point of view.

The stove must only be installed by a Gas Safe Registered engineer.

When installing the stove, all local rules and regulations, including those

referring to national and European standards must be complied with.

The installation must comlpy with the Building Regulations and Gas Safe-

ty (Installation and use) Regulation.

There must be no unauthorised modifications of the stove.

Before installation begins, it should be confirmed that the information

on the data plate regarding gas type and pressure is in accordance with

the local gas supply conditions under which the stove is to be installed.

You should ensure that the gas supply can supply the required quantity

of gas and pressure as described on the data plate. It is advisable to wear

gloves when installing and servicing the stove.

Gas connection

The inlet supply pipe has an external diameter of Ø8mm. An isolation

tap must be fitted.

Ventilation

This stove has a sealed combustion chamber and is intended for a bal-

anced draught. There is therefore no need for an extra air supply.

It is recommended that sufficient fresh air is supplied to the room to

maintain a comfortable environment.

This stove may be installed in a completely airtight building or a building

with mechanical ventilation.

Gas installation

Once it has been decided where the stove will be positioned, a gas in-

stallation should be established in the vicinity of the stove so that the gas

supply and stove can be connected.
As this stove has a sealed combustion chamber and a built-in plinth,

there is no need for a floor slab.

The installation must comply with the Building Regulations, Gas Safe-

ty (Installation & USe) Regulations, BS 5871, BS 5440-1, BS 6891 and

where relevant all LPG Codes of Practice. LPG stoves must not be fitted

in a basement.

installation of stove

English

RAIS/

attika

- User manual for Q-Tee II Gas / Q-Tee II C Gas

Содержание Q-Tee II GAS




























































































Результаты поиска

Содержание Q-Tee II GAS

Отзывы:

Похожие инструкции для Q-Tee II GAS

Бренды по названию

Популярные бренды

RAIS/attika Q-Tee II GAS, Руководство пользователя

Результаты поиска

Содержание Q-Tee II GAS

Отзывы:

Похожие инструкции для Q-Tee II GAS

Бренды по названию

Популярные бренды