9
RainWise Multi Display Users Guide
2014 Revision
2)
Setup Mode
Enter the setup mode:
Press
then
All the displays will go blank and the MIN and MAX lights will be flashing.
In the setup mode you can change one or all of the parameters. Select the parameter you wish to
change by pressing the appropriate button. Once you have changed that parameter, you will be
returned to the Setup mode. Choose another parameter or press
SELECT
to exit back to normal
operation.
2.1)
Time/Date
•
Be sure you are in the setup mode. The max and min LEDs should be flashing.
•
Press the
TIME
button (press on the word TIME). The current time will appear.
•
Press the
MAX
button once. Use the
MIN
and
MAX
buttons to select 12 hour or 24 hour
format. Press
SELECT
to accept.
•
Press the
MAX
button once. The hour will now be flashing. To change the hour press
the
MAX
button to increase and
MIN
to decrease it. The hours are shown in 24-hour
military time.
•
Press the
SELECT
button when the hour is correct. The minutes will now flash. Repeat
the same steps as with the hour adjustment.
•
Press
SELECT
when done. Note that the seconds are set to zero when
SELECT
is
pressed.
•
The month will flash. Set the month in the same way.
•
Press
SELECT
when done.
•
The day will flash. Set the day in the same way.
•
Press
SELECT
when done.