10
RainWise Multi Display Users Guide
2014 Revision
2.2)
Parameter Units
Units of temperature, wind speed, rainfall and barometric pressure can be set independently in
the setup mode.
2.21)
Temperature
•
Be sure you are in the setup mode. The max and min LEDs should be flashing.
•
Press
TEMPERATURE
(press the word TEMPERATURE).
•
The temperature display will show either “U 0” or “U 1”. This indicates the selected
temperature units. “0” is for Fahrenheit and “1” is for Celsius. The THI units are also set
by this option.
•
Press
MAX
button to select Celsius (“1”) or
MIN
for Fahrenheit (“0”).
•
Press
SELECT
when done.
2.22)
Wind Speed
•
Be sure you’re in the setup mode. The max and min LED’s should be flashing.
•
Press
WIND SPEED
(press on the words WIND SPEED).
•
The wind speed display will show “U.0”,”U.1”,”U.2” or “U.3”. This indicates the
selected wind speed units.
•
“U.0” is miles per hour, “U.1” is kilometers per hour, ”U.2” is knots and “U.3” is meters
per second.
2.23)
Rainfall
•
Be sure you are in the setup mode. The max and min LED’s should be flashing.
•
Press
RAINFALL
(press on the word RAINFALL).
•
The rainfall display will show either “U. 0” or “U. 1”
•
Press
MAX
button to select mm (“1”) or
MIN
for inches (“0”).
•
Press
SELECT
when done.
•
You can preset both rainfall counters by adjusting the value up and down using the
MIN
and
MAX
buttons. Press
SELECT
after each adjustment to save the preset value.