RainDrop Sense Operator’s Manual
LCN 50-04344 Rev. D
4-2
Introduction
The Instrument Control Software (ICS) application controls the operation of the RainDrop
®
Sense.
The Microsoft Windows 7 Login
The Instrument Control Workstation is configured with a single Microsoft Windows 7
Operating System login. Do not edit this account or add additional accounts. Failure to
comply will result in ICS failures. The default login is an administrative account. The system
differentiates between upper and lower case characters.
Note:
Do not use the RainDance Support Windows Logon. This will result in ICS failure.
Starting the ICS Application
The startup sequence works as follows:
1.
Power on each component of the RainDrop Sense in the following sequence:
Power on the IC Controller and log in to Windows.
Power on the RainDrop Sense. Wait one minute.
2.
Click the ICS icon on your desktop:
Note:
You can also start the ICS application by selecting Windows 7 Start Program Menu,
and then selecting
Start
>
All Programs
>
RainDance Technologies
>
Launch ICS.exe
.
Note:
The IC Workstation must be dedicated to ICS Operation. Use it only for RainDance
designated application and software uses.