determine
return
A menu
System settings
time setting
Use the up and down keys to change the time, the left and right keys to move the
cursor to the next position, the cursor will finally move to the confirmation point, and
then click the confirmation key.
Equipment
manageme
nt
Device
Information
Prompt settings
Screen standby
Use the arrow keys to select standby 15s, standby 30s, symbol machine 1min,
standby 2mm, and always on, and press the enter key to confirm the selection of the
screen on standby time.
Storage settings
change
Password
c
c
Restore Factory
Storage settings
Use the direction keys to select start storage, stop storage, delete storage, and
storage interval, and press the confirm key to confirm. The storage interval can be
set from 0-999 seconds, and all data will be cleared when the storage is deleted
Use the up and down keys to change the time, the left and right keys to move the
ursor to the next position, the cursor finally moves to the confirmation place, and
lick the confirm key to confirm the modified password.
Use the direction keys to select sound on, sound off, alarm on, and alarm off, and
press the confirm button to confirm the selection. Turn on the alarm to turn on the
sound
3.3
Operating instructions
1.
In the shutdown state, long press the 2S confirmation key, the device will
detect whether the buzzer is in normal use, and the device will enter the main
interface
2.
Short press the confirm button on the main page to enter the password
interface, the password defaults to 0000, press the cycle key to move the cursor to
confirm, and click the confirm button to enter the menu interface.
As shown in Figure 1:
3.3.1
System setting description
Move the cursor to the corresponding icon and click the confirm button to enter the
setting interface