1. Install 1/4" Hardware
(H1) (H9) (H32) (H215)
into center holes in Tarp Facias
(4147)
. A small
hammer or mallet may be used to pound 1/4" Hardware
(H32)
into back of Tarp Facias
(4147)
.
2. Position Penthouse Wood Roof Supports
(3183)
on top of Penthouse Corner Posts
(6320) (6321)
15/16"
from outside face of Penthouse Corner Posts (as shown in Inset A). Attach Penthouse
Roof Supports
(3183)
using 1/4" Hardware
(H1) (H100)
.
*NOTE: Penthouse Roof Supports (3183) should be flush together at the tops, centered in
the middle of Penthouse when properly installed.
3. Line up angled edges of Peak Facias
(0087)
with Penthouse Wood Roof Supports
(3183)
and
attach using #8 Hardware
(H154)
. Edges of Peak Facias
(0087)
must not protrude past edges
of Penthouse Wood Roof Supports
(3183)
.
4. Flush ends of Tarp Board
(3180)
with outside faces of Peak Facia
(0087)
and attach using #8
Hardware
(H154)
.
5. Measure up
1 1/4"
from top of Penthouse Corner Posts
(6320) (6321)
and attach Entrapment
Board
(9183)
to Penthouse Wood Roof Supports
(3183)
using #8 Hardware
(H154)
.
*NOTE: Ends of Entrapment Board (9183) must not protrude past edges of Penthouse
Wood Roof Supports (3183) when properly installed.
6. Position Penthouse Wood Roof Filler
(4164)
1 1/2"
down from bottom of Tarp Facia
(4147)
and
attach using 1/4" Hardware
(H1) (H97)
.
*NOTE: Wood Roof Filler must be installed on opposite Penthouse Corner Post from
Corner Post that will line up with Center Post on set.
*NOTE: Penthouse Roof Boards will be installed in a later step.
Continued on next page:
99
Step 58
Penthouse Wood Roof
Installation
