16
As indicated in the foreword, the addition of a radio interface unit enhances the programming of old generation
TBOS™ control modules and allows the transfer of programs by radio to the new TBOS-II™ control modules.
This simply requires the radio interface unit to be mounted on the old or new generation TBOS™ control module.
D – USING THE TBOS-II™ FIELD TRANSMITTER via RADIO
For information, the radio interface unit is compatible with the following old model TBOS™ control
modules:
-
K80 120, K80 220, K80 420, K80 620 (Europe)
-
K80 110, K80 210, K80 310, K80 410 (U.S)
1. Radio tagging of TBOS-II™ products
Radio tagging consists in sending the network number of the TBOS-II™ field transmitter to
the radio interface unit. The two radio products (TBOS-II™ field transmitter and radio inter-
face unit) must have the same network number in order to communicate with one another.
Radio tagging is performed only once in the lifetime of the product (the first time it is
used after leaving the factory) or if the user moves a radio interface unit
from one site to another (E.g. site 1 with network number 0001,
site 2: 0002, etc.).
Press any key to turn on the field transmitter and display the
welcome menu.
Press OK, select “TBOS Radio“ using the OFF key and confirm by
pressing OK.
The select “Radio tagging“ from the TBOS™ Radio menu.
A message will then appear on the screen.
Remove and reinsert the radio interface unit battery.
Confirm the radio tag on the TBOS-II™ field transmitter within 20
seconds of reinserting the battery.
TBOS-II™ Field
Transmitter
TBOS-II™ Field radio
interface
TBOS-II™ control module
1, 2, 4, 6 (old generation)
TBOS-II™ control module
1, 2, 4, 6
