background image

Rain Bird® Algae Control System™ (ACS)

  •  Owner’s Manual

SAVE THESE INSTRUCTIONS

8

Operations and Maintenance

easy-to-read Indicator lights

The Rain Bird ACS device has two lights on the power supply box . The solid “ON” green light indicates 

that the Power Supply is receiving electricity . The blinking green light indicates that your transducer 

is connected properly to the Power Suppy and receiving power to produce the ultrasonic waves . This 

indicator light requires positive feedback from the transducer in the water and shows you that the Rain 

Bird device is working properly . It will blink every other second on average .

check that the power supply lights are lit

Blinking Green Light 

=  Transducer is receiving power to  

 

generate ultrasonic waves . 

Solid Green Light

 = Power Supply is receiving electricity .

To operate effectively, the Rain Bird

®

 Algae Control System must be on 24-hours-a-day continuously emitting 

algae-killing ultrasonic waves . 

what to expect

You will begin to see results from within a few days to three weeks, depending on the type of algae and how 

much algae was established in your water site . In addition, while certain algae will sink to the bottom when 

killed, some forms turn brown and float on the surface in matts of dead algae . If this occurs, 

you

 

should then 

remove it from the water.

 Secondary blooms may occur due to the sunlight that can now reach the algae 

spores on the bottom that previously had not received sufficient sunlight to grow . Leave your device in the 

water and it will control the secondary bloom as well .  This kill/bloom sequence may repeat two or three 

times as the “reservoir” of spores is exhausted . After that, the water should stay clear . Occasionally, after major 

rain events, you may experience algae blooms caused by large amounts of algae spores being washed into 

your water site . Depending on the amount of algae in the bloom, it can take a couple of days to a week for  

the Rain Bird Algae Control System to bring the algae under control and clear the water .

Содержание RBACS400















Отзывы: