Rain Bird HDF 1X2, Руководство пользователя

Страница: 11 / 21

6.4 Securing the Equipment
Before securing the equipment to the ground, verify that
the equipment is level. Secure the equipment to the
ground using the appropriate type screws or bolts for the
type of ground the equipment will be resting on. The
screws should be placed in the 10 mm diameter
manifold holes.
6.5 Connection of the main manifolds, inlet, outlet and drainage
The main manifolds connections (inlet and outlet manifolds) are grooved. Use the supplied
accessories (as required) to connect the equipment to the rest of the system.
The drainage manifold has a PVC grooved coupling from factory that glues to a 3” PVC pipe.
Connect the inlet, outlet and drainage manifolds with its corresponding connections.
LEVEL AND SECURE TO
THE GROUND TO AVOID
VIBRATION
11
6.3 Adjusting the Height of the Equipment
You can modify the height of the equipment with the adjustable
supports. Prior to doing so it is important to be sure that the
equipment is properly supported by a lifting system. Once this
has been secured, unthread the screws of the supports and
adjust the height with the help of the lifting system.
The equipment must always be horizontal when positioning.
Verify that the equipment is supported by the lifting system before
unthreading the M10 screws of the supports.
3
3
,2
"
(4
3
m
m
)