Rain Bird FS200B Скачать руководство пользователя

Страница: 11 / 11

Rain Bird

Flow Sensors

Manual

Specifications

Sensor Sleeve and Hex Adapter for Brass Insert

Sensor (FS350B)

• Sleeve: Admiralty Brass, UNS C44300; Hex

Adapter: Valve Bronze, UNS C83600

Sensor Sleeve and Hex Adapter for Stainless Steel

Insert Sensor (FS350SS)

• 300 Series Stainless Steel

Tee for FS100B

• Cast valve bronze, UNS C83600

Tee for PVC Tee Sensors (F###P and

IFS###BPS)

• Schedule 80 PVC per ASTM D-2462 and D-2467.

Virgin, unplasticized PVC resin, Type 1 cell
classification

12454-B. Fittings and solvent carry approval for
potable water by NSF and IAMPO.

Pressure, Temperature Ratings

• Depends on hardware configurations. See

Diagrams at end of this section.

Recommended Design Flow Range

• 0.5 to 30 ft/sec

• Initial detection below 0.3 ft/sec

• 0.3 to 15 ft/sec for FS100B

Accuracy

• ± 1.0% of full scale over recommended design flow

range

Repeatability

• ± 0.3% of full scale over recommended design flow

range

• ± 0.7% of full scale over recommended design flow

range for FS100B

Linearity

• ± 0.2% of full scale over recommended design flow

range

• ± 0.7% of full scale over recommended design flow

range for FS100B

Transducer Excitation

• Typically provided by Rain Bird flow transmitter.

Any alternate supply must be of a resistance-limited
type meeting the following constraints:

• Source current @ 8 Volts: 1 mA minimum,20mA

maximum

• Short Circuit Current: 200 mA maximum

Output Frequency

• 3.2 Hz to 200 Hz

• 0.8 Hz to 80 Hz for FS100B

Output Pulse Width

• 5 msec ±25%

Electrical Cable

• 48 inches of U.L. Style 1056 copper solid AWG 18

wire w/direct burial insulation. Rated to 105°C.

PRESSURE/TEMPERATURE DIAGRAMS FOR

RAIN BIRD FLOW SENSORS

100

Temperature (°C)

FS150P
FS200P
FS300P
FS400P

400

200

-20

105

Temperature (°C)

FS100B
FS350B
FS350SS

Data
Industrial

[email protected]

877-243-1010

+1-800-RAINBIRD (800-724-6247)
+1-866-544-1406

® Registered Trademark of Rain Bird Corporation

PN# 72030 Rev C (03/23/15)

ssu

(

si)

(

)

Содержание FS200B












Результаты поиска

Содержание FS200B

Отзывы:

Похожие инструкции для FS200B

Бренды по названию

Популярные бренды

Rain Bird FS200B, Руководство пользователя

Результаты поиска

Содержание FS200B

Отзывы:

Похожие инструкции для FS200B

Бренды по названию

Популярные бренды