ESP-SMTe Controller
20
Manual Watering
Start watering immediately for selected zones or for all
zones.
c
b
NOTE: If Manual Watering is started during automatic
irrigation, the watering schedule is canceled for the
day and resumes on the next Allowed Watering Day.
Turn the dial to Manual Watering.
Water Individual Zone
A
Select Water Individual Zone from the Manual
Watering screen.
c
b
NOTE: A selected zone will be activated even if it is
not ENABLED. A zone that does not have an associ-
ated station module will display No Module.
B
Select the desired zone; then press NEXT.
C
Set the run time for the selected zone; then press
NEXT.
Water All Zones
A
Select Water All Zones from the Manual Watering screen.
c
b
NOTE: All zones will be activated even if they are not
ENABLED. Zones will not activate that do not have an
associated station module installed.
B
Set the run time for all zones; then press START.
Water Selected Zones
A
Select Water Selected Zones from the Manual
Watering screen..
c
b
NOTE: Selected zones will be activated even if they
are not ENABLED. Zones that do not have an associ-
ated station module will display n/a.
B
Select the desired zone or zones.
C
Set the run time for every desired zone; then press
NEXT until you reach the end of your available zones.
D
NEXT will change to START; then press START.
During All Manual Watering:
The Watering - Manual screen shows the current zone and
time remaining.
A
Press
–
or
+
to adjust the time remaining if desired.
B
Press ADV. ZONE to advance to the next zone if
desired.
C
To cancel watering, press CANCEL or turn the dial to
OFF for three seconds and then return the dial to the
AUTO RUN position.