Rail King USRA 2-8-8-2, Руководство по эксплуатации

Страница: 12 / 36

12
USRA 2-8-8-2 Steam Engine Operating Instructions
Activating Freight Yard Sounds (FYS)-
Detailed Instructions
Arming The Freight Yard Sounds Feature
Before the Freight Yard Sounds can be heard, the feature must be activated.
The feature can be activated in one of two ways:
Option 1:
If you are using the Z-4000™ transformer, or any transformer
with a separate bell button controller, you can activate the feature by simply
pressing and holding the bell button for at least three seconds (it does not
matter if you are in
forward, neutral or
reverse). You will hear
the bell turn on and,
after three seconds, you
should hear a short horn
blast or air release.
Once the horn blast or
air release is heard, the bell button can be released. The bell will continue
to chime, so if you want to turn off the bell ringing, simply press and release
the bell button. If you were in neutral, interrupt the transformer throttle to
enter the next directional state (either forward or reverse).
(Note: the FYS
will only play in the first Neutral after it is armed. You cannot interrupt
the power twice to enter another direction and still have the FYS active.)
You can now trigger the sounds to begin playing when you next enter
Neutral
Option 2:
If you do not have a Z-4000™ (separate bell button available),
you can activate the FYS using your transformer’s whistle button control.
To arm the FYS, turn on the transformer throttle and cycle your engine into
Neutral (not RESET). Once
in neutral, set the
transformer throttle to 8
volts or less and press and
hold the whistle button for
at least three seconds. You
will hear the bell turn on
and, after three seconds,
you should hear a short horn blast. Once the horn blast or air release is
heard, the whistle button can be released. The bell will continue to chime,
so it you want to turn off the bell ringing, simply press and release the