To program stations:
1. Running in Forward, stop the unit at the desired location for the first stop by
pressing the direction button. Note: if you stop the engine with the throttle
control, you must re-apply power so that the engine goes into neutral and does not
shut down.
2. Enter Learn Mode by pressing Horn - Bell - Bell - Bell - Bell. The train will then
announce that you have entered Learn Mode.
3. Press and hold the Bell button to scroll through the available stations until you
hear the one that you would like to be your first stop. Release the button quickly as
soon as you have heard the desired stop name.
4. Press and hold the Horn button until a "saved" response confirms that station's
location and name are saved in memory.
5. Proceed to the next stop by pressing the Direction button.
6. Press the Direction button to stop the train again when you have reached the
next desired station location.
7. Using the Bell button, select the name of the station, then save using the Horn
button.
8. Repeat steps 5-7 until you are ready to program the last stop in the route.
9. The manner of saving the last station in the route determines whether the route
will be an "Out & Back" or "Loop" route.
"Out & Back"
Follow steps 5-7 to save the last station. After you press the Horn button and
the sound system plays the "Saved" confirmation, press the Horn button
again. Another "Saved" confirmation will play and the car will exit Learn
Mode and enter Manual Mode.
“Loop"
Follow steps 5-7 to save the last station. Press the Direction button once to
start the car in forward and stop the car at the location of the first stop by
pressing the Direction button. Press the Bell button as many times as is
necessary to hear the name of the first stop. Press the Horn button until
the"Saved" confirmation is played. The car will then automatically exit Learn
Mode and enter Manual Mode.
RailKing R142 5-Car Subway Set
9
