2. Learn Mode
In Learn Mode, the engine may be programmed with either an "Out & Back" route
or a "Loop" route. An "Out & Back" route begins at the 1st station (as
programmed by the operator), stops at intermediate stations, ends at the last
station, then reverses its route until it reaches the 1st station. A "Loop" route
begins at the 1st station (as programmed by the operator), stops at intermediate
stations, ends at the last station, and then begins the route over again at the 1st
station.
Example Of An Out and Back:
Example Of A Loop:
Flatbush
Avenue
Flatbush
Avenue
241st
Street
42nd
Street
241st
Street
42nd
Street
Wall
Street
Flatbush
Avenue
42nd
Street
241st
Street
Wall
Street
RailKing R142 5-Car Subway Set
8
