Lubricating the Engine
Lubricate all exposed moving parts before operating using a multi-purpose,
plastic-compatible oil (available with M.T.H.'s Maintenance Kit, sold
separately) or a light household oil. Follow the lubrication points.
Priming the Smoke Unit
Y
ou should prime the smoke unit with smoke fluid before
operating. Add 15-20 drops of smoke fluid from the
included pipette through the smokestack, then gently blow
into the stack to eliminate any air bubbles in the fluid.
If you choose not to prime the unit with fluid, turn the
smoke unit switch located under the engine to the OFF
position.
Running the engine without a primed smoke
unit may cause damage.
See the "ProtoSmoke Unit
Operation" section of this book for more information
on smoke unit maintenance.
Coupling the Engine and Cars
DO NOT
OVER OIL
DO NOT
OVER OIL
DO NOT
OVER OIL
Lubricate Valve Gear
Lubricate Pick-Up Rollers
(Do Not Oil the Flat Part of
Pick-Up Rollers)
Lubricate Side Rods
Add 15-20 Drops
Smoke Fluid
Position
armiture
for proper
operation
Incorrect
Position
Place the engine and cars
on the track.
Open couplers by pressing
down on plunger.
Push cars together to
couple.
5
Running the engine without a primed
smoke unit may cause damage
STEP
1
1
STEP
2
2
STEP
3
3
Smoke Unit
ON/OFF Switch
RailKing 6-8-6 Bantam Turbine Steam Passenger Set with Loco-Sound™
