Operator’s Manual
© Copyright 2018 - Rail-Ability Limited
Page
33
of
70
Conversion
12.6 RCI Display
NOTE:
All the operating controls for the excavator arm are the same for rail use as construction site
use, refer to the ATLAS 180WSR operator hand book.
Once the screen has booted up, the display changes to the Initial Screen Pages.
12.6.1 Screen Surround
Figure 10 - Screen Surround
The round buttons are required in some instances, as detailed in the RCI Operator Manual.
NOTE:
After the Display has finished booting, the main screen page will display.
As this is the initial page of the system, the access to “Axles” (for rail axle control functions) and
“Menu” can only be obtained when this page is displayed, using the RCI Screen.
It is only on this page that it is possible to control the Axle lock and parking brake components of the
system using the function keys on the front of the display.
The horn icon shows if the horn is muted or not (a red cross is added when muted).
12.6.2 Travel Control
Tortoise/hare travel speed is also given on this page, along with a speedometer.
See RCI Manual for further details.
The speedometer numerically displays the current speed of the machine in miles per hour, and fills the
gauge from green to red over 12 increments as the speed increases as shown above.
12.6.3 Axle-Lock
All travel on rail track must be carried out with the axle unlocked.