JCB 714 Super-Boss Conversion
SB002
Operator’s Manual
Issue 1, R2
Last Updated 5 April 2017
Page 19 of 43
SCHEDULED MAINTENANCE INSPECTIONS SHALL BE PERFORMED BY QUALIFIED SERVICE
TECHNICIANS, ACCORDING TO THE MANUFACTUR
ER’S SPECIFICATIONS, GOVERNMENTAL
REGULATIONS AND THE REQUIREMENTS LISTED IN THE SERVICE MANUAL.
Checks
❑
ENSURE THAT THE OPER
ATOR’S AND SERVICE MANUALS ARE COMPLETE, LEGIBLE & IN
THE STORAGE CONTAINER LOCATED IN THE JCB CHASSIS CAB.
❑
ENSURE THAT ALL DECALS ARE LEGIBLE & IN PLACE. SEE DECALS SECTION.
❑
ENSURE GEAR SHIFT LEVER IS IN NEUTRAL.
❑
CHECK ENGINE & RELATED COMPONENTS (E.G. RADIATOR, ALTERNATOR, BELTS, ETC.).
SEE JCB MANUAL.
❑
CHECK FOR ENGINE OIL LEAKS & PROPER OIL LEVEL. ADD OIL IF NEEDED. SEE JCB
MANUAL.
❑
CHECK FOR HYDRAULIC OIL LEAKS & PROPER OIL LEVELS. ADD OIL IF NEEDED. SEE
MAINTENANCE SECTION.
❑
CHECK
TIGHTNESS
OF
WHEEL
NUTS.
❑
CHECK
CONDITION
OF
TYRES
&
WHEELS.
❑
CHECK FOR PROPER TIRE PRESSURE. ADD AIR TO THE FRONT TYRES IF NEEDED. SEE
MAINTENANCE & SPECIFICATIONS SECTIONS.
❑
CHECK CONDITION OF AXLES, TRANSMISSION & ARTICULATION LOCK
❑
CHECK OPERATION OF SERVICE & PARKING BRAKE. SEE JCB MANUAL.
❑
CHECK OPERATION OF THE ROAD & RAIL LIGHTS AND WARNING BEACONS.
❑
CHECK FOR BATTERY FLUID LEAKS. SEE JCB MANUAL.
❑
CHECK
CAB
WINDSCREEN
&
WIPERS.
❑
CHECK ALL ELECTRICAL PLUGS ARE CONNECTED & HYDRAULIC CONNECTIONS ARE
COUPLED.
❑
CHECK ALL BODY-LOCKS ARE ENGAGED AND LOCKED.
CHECK THE FOLLOWING COMPONENTS OR AREAS FOR DAMAGE, IMPROPERLY INSTALLED,
LOOSE OR MISSING PARTS AND UNAUTHORISED MODIFICATIONS:
❑
ELECTRICAL COMPONENTS, WIRING, ELECTRICAL CABLES & EARTH STRAPS.
❑
HYDRAULIC POWER UNIT, TANK, HOSES, PIPES, FITTINGS, CYLINDERS & MANIFOLDS
❑
BATTERIES & CONNECTIONS
❑
FUEL & HYDRAULIC TANKS
❑
MODULE TURNTABLE DRIVE MOTORS
❑
MODULE WEAR PADS
❑
PROXIMITY SWITCHES, ALARMS & HORNS
