Raidon SR6600 Series, Руководство пользователя

Страница: 26 / 36

2.4.1.5 Tagged Queuing
Enabling this function will offer more stable performance between systems. Please turn off this function if
your SCSI card does not support Command Tag Queuing.
2.4.1.6 IDE Channel
You can choose which interface to use for data transfers:
• Channel 0: IDE Interface
• Channel 1: SATA Interface
2.4.1.7 IDE Xfer Mode
Support for ATA133, ATA100, ATA66 and ATA33. This is mainly used to configure the internal RAID
controller.
2.4.2 Delete Volume Set
This function can be used to delete the existing volume set.
2.4.3 Modify Volume Set
This function can be used to re-define or modify a volume set’s attributes.
2.4.4 Check Volume Set
Use this function to check the consistency of the volume set.
2.4.5 Stop Volume Set Check
Stop the volume set consistency check currently in progress.
2.5 Physical Drive
This function shows all of the physical drive related information including:
• Create Pass Through Disk
• Modify Pass Through Disk
• Delete Pass Through Disk
• Identify the Device
2.5.1 Create Pass Through Disk
This HDD will not be added to the RAID set and will be treated as an independent disk drive by the
operating system. Once this HDD has been set up, the hardware information will be shown.
26
System Management