Raidon SR6600 Series, Руководство пользователя

Страница: 10 / 36

3) Configure the relevant data settings (refer to the table below). Once setup is complete, select File →
Contentt → Settings and set the terminal mode to vt100. Once the settings have been set select “OK”
to make the connection.
4) Once connected, enter the password to log in. Default Password: 0000
1.2.2 Login to Web GUI via RS232 Cable (Windows systems only)
If you choose to log in via the Web GUI over a RS232 Connection, you must first install the “GUI-
Com2Http” software. Insert the included CD-ROM in the CD-ROM Drive then under “Management
Software” select “GUI-COM2Http” to install the software automatically. Alternatively, you can go directly
into the CD-ROM’s contents, open the “GUI-COM2Http” folder under “Management Software” and click
on “Setup.exe” to launch the installer.
10
System Login