Connecting SR2611 to your computer
1. Connect DC12V&5V power cables and SATA cables to SR2611.
2. Connect SATA cable to SATA port on the motherboard.
45cm SATA Cable Power Supply Connector
Real Panel
Internal Case
Note :
We do not recommend users to disassemble the machine without proper instructions and
authorization. The manufacture warranty will not cover damage caused by unauthorized
disassembling.
Setting the Hard Drive Array Mode
Please select the RAID mode with the jumper located at the back panel. The original default
is RAID 1, still there are three pins at the back panel for RAID mode selection:
RAID 0 mode by setting the jumper on the left of the two pins.
RAID 1 mode by setting the jumper on the right of the two pins.
1. RAID 0 Mode
1). Place two new hard drives into SR2611 and strongly suggest you to use two identical
hard drives to get the equal capacity. If the capacity is different, SR2611 is downward
to the small hard drive capacity.
2). Under RAID 0 mode, capacity is add up to a one big volume, also with the feature of
faster read/write performance efficient.
SA
TA
SA
TA
1
2
1
2
SATA Ports
Power Supply
SR2611
Motherboard
1
2
6 Connecting SR2611 to your computer / Setting the Hard Drive Array Mode
