Hardware Introduction
Front Panel Real Panel
1
LCD Panel
2
HDD Tray
1
eSATA Port
2
Power Socket
3
Mute Button
4
Key Lock
3
RAID Mode
4
5cm Fan
5
HDD Access LED
6
Fail LED
Note :
Status Indications of LEDs:
HDD Access LED will flash yellow when the data is accessed from the hard drive.
Fail LED will light red when HD failed, temperature is higher than 60 C or fan fails.
System Requirement & Environment
requirement and notices
Hardware Requirement
1. Computers or servers with SATA I& SATA II
2. Hard drive with SATA I& SATA II
Environment requirement and notices
1. SR2611’s brilliant design allows the user to simultaneously utilize two hard drives manu
factured by different companies. However, if the user expects better efficiency, we strongly
recommend the users to use hard drives manufactured by the same manufacturer.
2. Since the system uses more stringent factors to determine the disk corruption in the hard
drive, please use noncorrupted hard drive with minimum storage capacity of 20 GB.
3. The SR2611 had undergone strict hard drive compatibility test. The result shows that it is
compatible with most hard drives on the market such as Maxtor, Western Digital, Seagate,
Fujitsu, Hitachi, and etc. However, due to the new types of hard drives appearing on the
market, if your hard drive is not compatible with the system, please contact us through the
following email:[email protected] and we will reply as soon as possible.
2
1
5
3
4
6
1
2
3
4
4 Hardware Introduction / System Requirement & Environment requirement and notices
