w w w . R A I D O N . c o m . t w
Your Data Security Guardian
1.6 Click on Next after date and time are set and the confirmation screen displays. Click on Save
to store your settings if all information shown on the screen is valid.
1.7 The system prompts you to confirm changing to new settings after the option Save was
selected. Click on OK to continue and Cancel to discard the changes that you made.
1.8 The system automatically returns to the first screen. Please follow the steps described above
to change to other systems settings or click on Exit if all the desired changes have been made.
Note:
1. The system may take about 2 minutes to start up your SL5640 product after a system power on.
Before this, your SL5640 product cannot be found.
2. If your SL5640 product is set to get the IP address assigned by the DHCP server and failed to
do so, it will use as its default IP address 192.168.1.20 instead. Please set your PC to the same
network segment 192.168.1.xxx to enter the SL5640 log in window.
3. When using your SL5640 product for the first time, you are required to select one standalone
hard disk or create one disk array before doing other setup operations.
