background image

w w w . R A I D O N . c o m . t w

Your Data Security Guardian

Chapter 6 Replacement of Malfunctioning Drive 

and Data Rebuild Instructions

When a front hard drive indicator has lit up red and the audio alarm sounds, this could mean the 

indicated hard drive may be malfunctioning. If this occurs, you may press the mute button at the 

rear of the system to shut off the audio alarm and power off the system immediately if in the 

allowed operational state, and then re-power on the system to double check and see if in fact the 

indicated hard drive has malfunctioned. If the problem persists, please turn off the system and 

follow the directions below :

Step 1 

Remove the drive tray containing the malfunctioned hard drive and disassemble the hard 

drive from drive tray.

Step 2 

Mount the new hard drive onto the tray and insert it back to the empty drive position of 

the GR5630, then push the latch into place making sure it is secured and locked.

Step 3 

In RAID 5 mode, when you turn the system on, the hard drive status indicator of the 

replacement drive will interchangeably blink red and purple to inform that the data is 

being rebuilt to the replacement drive. During data rebuild, you may operate the 

GR5630-WSB3+ as normal. When the indicator stops, the data rebuild process has been 

completed. 

Chapter 7 System Temperature Overheat 

and Fan Failure Management

If the alarm indicator has lit up red and the audio alarm sounds, this could mean that either a 

system fan has stopped operating entirely or the system temperature has exceeded over the 

default temperature of 60°C. When this occurs, you may press the mute button at the rear of 

the system to shut off the audio alarm and power off the system immediately if in the allowed 

operational state to let the system cool. Check and see if the overall operation environment is 

well ventilated and make sure there are no blockages to the enclosed fan and then re-power on 

the system to continue use. If the problem persists, please turn off the system and contact your 

supplier or the RAIDON tech support for further assistance.

Содержание SafeTANK GR5630-WSB3+









Отзывы: