w w w . R A I D O N . c o m . t w
Your Data Security Guardian
Chapter 8 Visual Status Indicator Definitions
Chapter 9 Frequently Asked Questions
Q1. Which drive format should I choose to format the hard drives in the GR5630-WSB3+?
A :
It depends on the computer system you most often use. See the below suggestions:
1.Use NTFS format for Windows 2000/XP/Vista/Windows 7 system
2.Use HFS+ (Mac OS Extended) format for a Mac OS X system
3.Choose FAT32 format if you’ll use the GR5630 in both Windows and Mac environments
(the maximum size of one single file may not exceed 4 GB).
Q2. Why can’t my GR5630-WSB3+ reach the transfer performance speed of 200 MB/s via
e-SATA interface as stated on your website?
A :
1.Please first check if your PCI-E SATA host adapter would only support PCI-E (1X). This type
of host adapters cannot reach the transfer performance speed beyond 135MB/s.
2.The GR5630-WSB3+ will need to be set to the RAID 0 mode also.
States
Power on
No disk
Disk Fail
RAID Fail
Disk Idle
Format
Access
Fan Fail
Blue
Blue
Blue
Blue
Blue
Blue
Blue
Source: Blue flash
Target: Blue and Purple
light on alternatively
1 long when
booting finished
Blue flash
Blue flash
Blue
Blue
Blue
Blue
Blue
Power LED
Alarm LED
--------
--------
--------
--------
--------
--------
--------
--------
--------
--------
--------
--------
--------
--------
--------
Red
Red
Red
Red
HDD LED
buzzer
4 short
4 short
4 short
Blue flash => Blue
Front LED
Blue
Over Temp.
Rebuilding
