Raider RDP-JS34, Руководство пользователя, Страница: 13 / 62

13
Note: Jig Saws RD-JS11 and RD-JS18 are
equipped with laser guides, and RD-JS14 model
with automatic clamping of the cutting sheet.
15. Maintenance and service.
15.1. Maintenance and cleaning.
Before carrying out any activities jig saw
unplug the plug from the supply network. To
work quality and safety, keep the power vent and
clean. Regularly clean the socket for clamping
of the cutting sheets. For this purpose, the
cutting blade and removing stuck iztraskayte
filings by tapping on a stable basis. Strong
contamination of jig saw could lead to violations
of its functioning. Therefore, no cut in the ceiling
or bottom position materials that emit large
amounts of chips and dust.
15.2. In extremely severe working conditions
in cutting of metal on the inner surfaces of the
body may be delayed tokoprovezhdasht powder.
This can disrupt the protective insulation jig saw.
In such cases, it is recommended to use a fixed
aspiration system, frequent blowing vent and jig
saw the inclusion of safety in electrical breaker Fi
(safety shut-off switch with Residual protection),
and current leakage, which is triggered when
DTZ should not more than 30 mA., according to
“Regulation 3 for the electric drive systems and
power lines.
Periodically lubricate the lead roll (6) with one
drop of machine oil. Check regularly leading roll
(6). If worn, it must be replaced at an authorized
service for a RAIDER.
16. Environmental protection.
In view of environmental power, additional
accessories and packaging must be subjected
to appropriate processing for reuse of the
information contained in these materials.
Do not dispose of household waste power!
Under the EU Directive 2012/19/EC on scrapped
electrical and electronic devices and to win
recognition as a national power law, which can
be used more, must be collected separately
and be subjected to appropriate processing for
recovery of contained therein scrap.
SAFETY RULES FOR LASER DEVICE
Laser device used in the power tool design is the
class 2 with maximum power below 1mW and
wavelength 650 nm. Such device is not dangerous
to your sight, however do not look directly at the
source of the light (temporary blindness hazard).
WARNING. Do not look directly at the source of
laser beam. It may cause hazards. Follow the below
safety rules.
Use the laser device in accordance to the
manufacturer’s instructions.
Do not, either intentionally or unintentionally, point
the laser beam at people, animals or any object
other than processed material.
Do not bring to accidental pointing the laser beam
at bystanders’ or animals’ eyes for a period longer
than 0.25 seconds, for instance by pointing the laser
beam at mirrors.
Always ensure the laser beam is directed at material
which does not have any reflective surfaces.
Reflective steel sheet does not allow for laser use,
because it might cause hazardous light reflection
directed at operator, bystanders or animals.
Do not replace laser assembly with device of
other type. Any repair should be conducted by the
manufacturer or authorized person.