Raider RDP-JS34, Руководство пользователя, Страница: 11 / 62

11
jig saw to replace work tools and additional
accessories as well as a long time when you will
not use jig saw, unplug the plug from the supply
network. This measure eliminates the danger of
imposing a jig saw inadvertently.
4.4. Keep Knife Cutters in places where they
can be reached by children. Do not allow them
to be used by persons who are not familiar
with how to work with them and have not read
those instructions. When you are in the hands
of inexperienced users, pierced saws can be
extremely dangerous.
4.5. Keep jig saw his care. Check whether
the mobile units operate impeccable, whether
it spells, if there is broken or damaged items
which distort or alter the functions of a jig saw.
Jig before using a saw, make sure that the
damaged parts to be repaired. Many accidents
are caused by poorly maintained power tools
and appliances.
4.6. Keep your cutting tools well sharpened
and always clean. Properly maintained cutting
tools with sharp edges have less resistance and
working with them easier.
4.7. Use Knife Cutters, attachment, working
tools, etc., according to the manufacturer’s
instructions. In doing so must comply with
specific operating conditions and operations
to perform. The use of jig of saws for various
applications provided by the manufacturer
increases the risk of accidents.
5. Maintenance.
The repair of your power is best carried
out only by qualified specialists in workshops
RAIDER, which used only original spare parts.
Thus ensuring their safe operation.
6. Instructions for safe handling of jig saws.
6.1. Where there is danger at work affect the
work tools hidden beneath the surface under
tension wires or power cord, power only to touch
handles isolated. In contact with the wire under
tension, it is transmitted to the metal parts of
power and this may cause electric shock.
6.2. Keep your hands off the cutting zone. Do
not touch below the workpiece. Threaten to hurt
yourself if you touch the cutting sheet.
6.3. Touch electric tool to the workpiece, after
having it on you. Otherwise there is a risk of
occurrence of recoil if the cutting sheet is zaklini
in the workpiece.
6.4. During the careful cutting the main
plate (5) to interact with the workpiece stable
throughout its surface. If cutting is zaklini sheet,
it can cause breakage or recoil of the cutting
sheet.
6.5. After completing the first cut wait jig saw
stop. Then remove from the site of the cut. So
avoid the risk of recoil and you can safely leave
the power of the working surface.
6.6. Use only cutting sheets in impeccable
condition. Blunt or curved blades may break or
cause reverse kick.
6.7. After sawing off the jig did not stop cutting
sheet forced by squeezing it. Cutting sheet may
be damaged, broken, or to cause a reverse kick.
6.8. Use appropriate instruments to find any
hidden beneath the surface pipelines, or contact
the appropriate local supply company. Into
contact with the wires under tension can cause
fire or electric shock. Pipeline damage can lead
to explosion. Deterioration of water has the
effect of major material damage and may cause
electric shock.
6.9. Provide workpiece. Detail, and attach with
appropriate appliances or braces is anchored
more firmly and securely than if you hold it by
hand.
6.10. Before you leave a jig saw, wait for
rotation to stop completely. Otherwise, use
work tool can touch another object and cause
uncontrolled transfer of power. Do not use a jig
saw where the power cord is damaged. If during
operation the cable is damaged, do not touch,
immediately disconnect the plug from the outlet.
Damaged power cables increase the risk of
electric shock.
7. Purpose of the jig saw.
Jig Saw is a manual with power isolation
second grade. Is driven by a collector of single-
phase motor. This type of power is widely used
for cutting wood, darvesnopodobni materials
and synthetic materials and metals. The areas
of use are carrying out repair and construction,
carpentry and other work-related self-amateur
activity.
8. Technical data
Information on noise and vibration emitted.
The values are measured according to EN
62841. A level of noise generated is generally:
the sound pressure level 84.6 dB (A); sound
power 95.6 dB (A). Uncertainty K = 3 dB.
Work with a silencer!
Full value of the vibration (the vector sum of
the three directions) is determined according to
EN 62841: Cutting of trees: vibrations generated
ah=4.535 m/s
2
, uncertainty K = 1,5 m/s2, cutting