Raider RD-RW01, Руководство пользователя

Страница: 15 / 118

15
better and more safely if used for the purpose for which it has been built.
2. Do not use the tool if the switch does not allow to turn it on or off. Any tool that can not be controlled by the
switch is dangerous and must be repaired.
3. Disconnect the power source supply or battery block tool before changing accessories or before storing the
tool. These preventive safety measures reduce the risk of accidental starting of the tool.
4. Keep the tool off away from children and do not allow to be used by people who are not familiar with the
tool. Tools are dangerous in the hands of inexperienced.
5. Do not force the tool. Use the right tool for the application being performed. A suitable tool will do the job
better and more safely if used for the purpose for which it has been built.
6. Do not use the tool if the switch does not allow you to turn it on or off. Any tool that can not be controlled by
the switch is dangerous and must be repaired.
7. Disconnect the power supply and battery charger before changing accessories or before storing the tool.
These preventive safety measures reduce the risk of accidental starting of the tool.
8. Keep the tool away from children and do not allow tool to be used by people who are not
familiar with the operation of the tool. Tools are dangerous in the hands of inexperienced operators.
9. Make sure the tools moving parts are not aligned or blocked, that it has not broken any parts or any other
condition that may affect the operation of the tool. In case of damage, take the tool to a repair service before
using it again. Many accidents are caused by poorly maintained tools.
10. Tools used for cutting, with sharp pieces that have had good maintenance, are less likely to become
blocked and are easier to control.
11. Use the tool, accessories and blades, etc. according to these instructions, taking into account the working
conditions and the work to be done. The use of the tool for operations other than those provided can lead to
dangerous situations.
Use of cordless machine
1. Do not use any other charger than the one specified by the manufacturer. A charger that fits to a type of
battery can cause a risk of fire when used with other types of batteries.
2. Do not use tools with batteries other than those specified. The use of any other type of battery may create
a risk of injury and fire.
3. If the batteries are not used, keep them away from other metal objects such as clips, coins, keys, nails,
screws or other small objects that can lead to a connection from one terminal to another. Short-circuiting the
terminals of a battery can cause burns or fire.
4. In bad conditions, liquid may be ejected from the battery; avoid any contact. In case of accidental contact,
flush with water. If the fluid comes into contact with eyes, seek medical assistance. The ejected battery fluid
may cause irritation or burns.
Care and maintenance
1. Repairs must be performed by a qualified expert, using only identical replacement parts. This will ensure
that the safety of the tool is maintained.
2. Remove the battery from tool and disconnect the charger from the wall outlet before cleaning.
CLEANING
1. Keep protection devices, air vents and the motor housing as clean (dust free) as possible. Clean the tool
with a clean cloth or clean with compressed air at low pressure.
2. We recommend cleaning the tool directly after each use.