Raider RD-HB02, Оригинальное руководство пользователя

Страница: 8 / 30

8
4.2. Descent.
Place the jack under the vehicle at the designated point by the manufacturer. (See
4.1.). Raise the vehicle with the jack and remove the supports. Very slowly and carefully
turn the valve (2) in the direction of counterclockwise. Vehicle will rush into your
gravity.
5. Maintenance.
5.1. Topping up the hydraulic oil.
Place the jack on a horizontal basis. You’ll see at the top of the power cylinder, rubber
stopper for filling the hydraulic oil. If the oil level is lower than 12 mm from the edge
of the hole, then you must make up hydraulic oil. Recommended hydraulic oil with
viscosity class 10 SAE. After topping up of oil obezvazdushete. (See also item 3.1.).
Be careful during the topping up or changing the oil, it does not fall to dust or other
contaminants.
5.2. Lubricated to prevent corrosion.
Piston rod of the power cylinder should be cleaned every three months with a clean
cotton cloth soaked in oil.
5.3. In the storage and prolonged non jack he must descend into extreme down
position.
6. Environmental protection.
Hydraulic oil is a liquid that pollute the environment. Operations associated with
the valley and oil change should take measures against the accidental spillage of oil.
Do not dispose of disused hydraulic jacks household waste! In view of environmental
protection in the transmission of secondary raw materials, hydraulic oil to bleed into
the office and for processing in accordance with the rules. Prohibited to discharge of
hydraulic oil into drains or open water sources.