Rev. 5_1_17
Bogert Aviation Inc.
Cessna 30M-C402-K, Main Landing Gear Axle Jacking Procedure
Works on Cessna Models:
Cessna 402 Jacking system designed to work on Cessna 340, 401,402, 411, 414 and 421(to Serial 800).
May 1
st
, 2017
Caution
: This tool is to be used to lift only one wheel at a time. All other wheels must be
securely chocked. Failure to follow these instructions may result in damage to the aircraft, severe
injury or death. Use only jacks that are rated for the load being lifted.
CAUTION:
1.
Make sure the aircraft is on a solid level surface and chock the two wheels that are not being lifted.
2.
No one may be in the aircraft when supported by this jack pad.
3.
Use only jacks adequately rated for the weight.
4.
Extend the jack only enough to clear the wheel from the ground for removal.
5.
Use a jack stand under the wheels axle for safety anytime the wheel is removed.
We suggest using the Bogert Aviation 17M-LGSS2 or similar PN 17M-LGSS
(Landing Gear Safety Stand).
