Raider RD-CIW01, Руководство пользователя

Страница: 10 / 92

10 www.raider.bg
live wires, keep the power tool only for the electrically insulated handles. When the tool comes into contact with live wires,
it is transmitted to the metal parts of the battery nut, and this can lead to electric shock.
1.5.4. Use suitable utensils to find any hidden under-pipe pipelines or contact your local supply company. Contact with
live wires may cause fire and electric shock. Damage to a gas pipeline may lead to an explosion. Damage to the water mains
results in major material damage and may cause electric shock.
1.5.5. Provide the machined detail.
A detail gripped with appropriate fittings or brackets is locked more firmly and securely than if you hold it by hand.
1.5.6. Regularly clean the ventilation holes of your battery wiper.
1.5.7. Use only the recommended battery and charger.
1.5.8. The battery should always be kept away from heat sources. Do not leave it in a high temperature environment (in
sunny places, near heaters or where the temperature exceeds 50 ° C).
1.5.9. Avoid charging the battery at temperatures below 0 ° C.
1.5.10. The charger supplied with the battery wiper is intended for use only with it. It should not be used for other purposes.
1.5.11. Do not place any metal objects in the charger.
1.5.12. Do not change the direction of rotation of the spindle of the battery nut during operation. This will damage her.
1.5.13. To clean the battery nut, use soft and dry cloth. Never use any solvent or alcohol.
1.5.14. Before cleaning the charger, unplug the charger.
1.5.15. If you are going to charge batteries consecutively one after the other, make a 30-minute break between charges.
1.6. Special safety precautions when operating the charger.
Before charging the charger, all relevant information and information contained in this instruction manual as well as the
charger and battery charging instructions for this charger must be read.
1.6.1. To reduce the risk of personal injury and injuries, the charger must only be used to charge lithium ion type. batteries.
Other types of batteries may explode, cause serious injuries or other material damage.
1.6.2. Do not expose the charger to the influence of moisture or water.
1.6.3. The use of connection, non-recommended or non-sold items by the charger manufacturer is liable to cause a fire,
cause bodily injury or electric shock.
1.6.4. The power cord should not be inserted. It should not be in a passage where people pass and should not be subjected
to any other danger (for example too much tension).
1.6.5. If there is no need, do not use an extension. Using an inappropriate extension may cause a fire or electric shock.
If using an extension cord is necessary, first make sure that the extension of the extension extends to the pins of the original
power supply plug.
1.6.6. The extension must be in the correct technical condition.
1.6.7. Do not use the charger with a damaged power cord or plug. The fault must be removed by a qualified person.
1.6.8. It is not allowed to use the charger if it has been subject to a strong shock, fall or has been damaged in any other
way. Verification and eventual repair must be entrusted to an authorized RAIDER service center.
1.6.9. Do not disassemble the charger. All repairs should be entrusted to an authorized RAIDER service center. Incorrect
installation of the charger will cause an electric shock or fire.
1.6.10. Before proceeding with any service or cleaning the charger, it must be disconnected from the mains.
1.6.11. Disconnect the charger from the mains when not in use!
2. Design and use.