Raider RD-BS06, Руководство пользователя

Страница: 11 / 68

11
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control.
4.7. Use the power tool, accessories and tool
bits etc. in accordance with these instructions,
taking into account the working conditions and
the work to be performed. Use of the power tool
for operations different from those intended
could result in a hazardous situation.
5. Guidelines for the safe handling, specific
purchased your band grind.
When working with tape grinding wear ear
protectors. Effects of loud noise can damage
your hearing. Hold the band grinding machine
firmly with both hands. Loss of control over
power could lead to the occurrence of accidents.
5.1. Do not use additional devices which are not
recommended by the manufacturer specifically
for that power. The fact that you can attach to
the machine specified device or instrument used
does not ensure safe working with him.
5.2. Work with personal protective equipment.
Depending on the application operate over a
mask for the face, protect the eyes or goggles. If
necessary, work with breathing mask, silencers
(hearing protectors), work shoes or special
apron that you protect small dislodge the work of
particles. Your eyes must be protected from flying
into the working area particles. Dust or breathing
mask filter arising from the use of powder. If long
you are exposed to loud noise, this can lead to
hearing loss.
5.3. If you perform activities which threaten the
working instrument to fall on hidden wires under
tension or affect the power cord, hold power
only elektroizoliranite handles. When entering
the working tool in contact with the wires under
tension, it is transmitted through the metal parts
of the band grind and this may lead to electric
shock.
5.4. Keep the power cord a safe distance from
rotating work tools. If you lose control over the
band grinding machine, the cable can be cut or
fascinated by the working tool and it can cause
injuries.
5.5. Never leave band grinding before the tape
with sandpaper to completely stop spinning her.
Rotary tool can touch the object, resulting in
losing control over the band grind.
5.6. Regularly clean the vent on your band
grind.
5.7. Do not use band grinding machine near
flammable materials. Flying sparks can cause the
ignition of such materials.
5.8. Never put your hands near the rotary
working tools.
5.9. If the supply voltage is interrupted (eg
due to blackouts, or if the plug is removed from
contact) unblock the trigger switch and place it
in position “off”. This will prevent uncontrolled
inclusion of band grind.
5.10. Use a band grinding machine for dry
grinding. Penetration of water in it increases the
risk of electric shock.
5.11. Touch grind to the workpiece only after
you’ve turned and reached maximum speed and
then switch after you have separated themselves
from the elements. Otherwise, grind can rebound
suddenly.
5.12. Provide workpiece. Detail, and attach with
appropriate appliances or braces is anchored
more firmly and securely than if you hold it by
hand.
5.13. Do not use worn, cracked or heavily
stained bands sandpaper. Damaged tape
sandpaper can break, bits of them othvarchat
with great speed and injure someone.
5.14. Dust released during the processing of
materials, such as containing lead paint, some
wood, minerals and metals can be hazardous to
health. Contact to the skin or inhalation of such
powders can cause allergic reactions and / or
respiratory illnesses to working with power tools
or nearby persons. Certain powders, for example
released during the processing of beech and oak
are considered to be carcinogenic, particularly
in combination with chemical treatment of wood.
Not be allowed to the processing of materials
containing asbestos.
5.15. Keep your workplace clean. Mixtures of
different materials are particularly hazardous.
Fine shavings from light metals can be
samovazplamenyat or explode.
5.16. Warning, danger of fire! Avoid overheating
the ground detail and machinery grinding. When
interruption is always empty prahoulovitelnata
bag. In adverse conditions, such as streak sparks
when grinding metals gathered in the filter
bag dust can samovazplameni. The danger of
ignition is increased exclusively in a mixture of
powder ground with remnants of paint coatings,
polyurethane or other organic substances and as
a result of continued processing cut material is
heated.
5.17. Do not use band grinding machine when
the power cord is damaged. If during operation
the cable is damaged, do not touch. Immediately
disconnect the plug from the outlet. Damaged