23
In this case, the trim angle should be increased by setting the thrust rod in a higher hole.
Select a higher hole
The Reverse Lock Lever is located on the starboard side - to "RELEASE" by turning it downward.
Tilt the engine up entirely. The tilt will lock in the raised position.
To tilt the engine down. Turn the Reverse Lock Lever upward (toward "LOCK"). Tilt the engine up
slightly and then let it go down.
(The Reverse Lock will be set automatically.)
When tilting up or down, be sure that no finger or hand is
placed in between the swivel bracket and stern bracket.
Be
sure to tilt down the outboard slowly
.
