Raider PRO RDP-SDWCH20 solo, Руководство пользователя

Страница: 14 / 48

14 www.raider.bg
The 2-in-1 crevice/brush nozzle with swing-
out brush (12) is designed for vacuuming
solids and liquids in corners, edges and
other areas that are difficult to access.
Operation
On/Off switch (Fig. 1/2)
Switch position 0: Off
Switch position I: On
Dry vacuuming
Use the cartridge filter (13) or cartridge filter
(13) and cloth filter (14) for dry vacuuming
(see point 5.2).
Always ensure that the filters are perfectly
secure.
Wet vacuuming
For wet-vacuuming, use the foam filter (15)
(see point 5.2).
Check that the filter is securely fitted at all
times.
When wet vacuuming, the floating safety
switch (Fig. 3/5) closes when the maximum
tank level is reached. In doing so, the suction
noise of the equipment will change and
become louder. You must then switch off the
equipment and empty the tank.
Danger!
The wet and dry vacuum cleaner is not
suitable for the vacuuming of combustible
liquids.
For wet vacuuming, use only the supplied
foam filter.
Blowing
Connect the suction hose (10) to the blow
connector (9) on the wet and dry vacuum
cleaner.
Cleaning, maintenance and ordering of spare
parts
Danger! Always pull out the battery before
starting any cleaning work.
Cleaning
Keep all safety devices, air vents and the
motor housing free of dirt and dust as far as
possible.
We recommend that you clean the equipment
immediately after you use it.
Cleaning the appliance head (Fig.1/3)
Clean the appliance regularly with a damp
cloth and some soft soap. Do not use
cleaning agents or solvents; these may
be aggressive to the plastic parts in the
appliance.
Cleaning the tank (Fig.1/7)
The tank can be cleaned with a damp cloth
and some soft soap or under running water,
depending on the amount of dirt.
Cleaning the cartridge filter (Fig.2/13)
Clean the cartridge filter (13) regularly by
carefully patting it and cleaning it with a fine
brush or hand brush.
Cleaning the cloth filter (Fig.2/14)
Clean the cloth filter (14) by gently tapping
or brushing dirt off. If it is really dirty, Use
a mild soap and water solution to wash
reusable cloth filter and rinse with clean
water. Allow the filter to air dry for 24 hours
before installing onto the filter cage.
Cleaning the foam filter (Fig.2/15)
Clean the foam filter (15) with a little soft
soap under running water and allow it to air-
dry.
Servicing
At regular intervals and before each use,
check that the filters in the wet and dry
vacuum cleaner are securely fitted.
Ordering spare parts
Please provide the following information on
all orders for spare parts:
Model/type of the equipment
Part number of the required spare part
Storage
Store the equipment and accessories in
a dark and dry place at above freezing
temperature. The ideal storage temperature
is between 5 and 30°C. Store the electric tool
in its original packaging.
Trouble-shooting
If the vacuum vibrates abnormally, stop
motor immediately. Abnormal vibration
usually indicates a mechanical problem,
continued operation could lead to injury or
damage.
Note: The distributor will not be responsible
for any damage or injuries caused by the
repair of the vacuum by an unauthorized
person or by mishandling of the vacuum.