Raider Pro RDP-JS26, Руководство пользователя

Страница: 12 / 76

12 www.raider.bg
arcs use the narrow cutting sheets.
9.2. Placement and replacement of the cutting
sheet. Before carrying out any activities jig saw
unplug the plug from the supply network. When
mounting the cutting sheet work with protective
gloves. Threaten to hurt yourself in contact with the
cutting edges of the sheet. Prior to cutting the tail of
the clean sheet. Contaminated tail can not be caught
for sure. Move the handles of slot cutting sheet 8 so
that you have easy access to hexagon bolts. Insert
the cutting sheet at point blank into the slot for grip
with the teeth facing in the direction of cutting. When
you insert a sheet of careful cutting its rear edge to
fall in the grooves of the lead pulley 6. Precise cuts
are possible only if the leading roller 6 rests against,
but not too tight in the back of the cutting sheet.
Tighten well hexagon bolts with the help of keys (4),
which is located at the rear of a nozzle vibroshlayfa
to include aspiration system.
Replacement blade for use in the attached
hexagon key set. Unscrew counterclockwise and the
two screws holding the knife. Insert the new knife,
then make sure the cutting attach sheet is healthy.
If cutting sheet is snatched hard at work can be
removed and you hurt.
10. Dust-extraction system.
Dust released during the processing of materials
such as paints containing lead, some wood, minerals
and metals can be hazardous to health. By skin
contact or inhalation of such powders can cause
allergic reactions and / or respiratory illnesses to
working with power tools or nearby persons. Certain
powders, for example released during the processing
of beech and oak are considered to be carcinogenic,
particularly in combination with chemical treatment
of wood (chromate, preservatives, etc.). Where
possible, use dust-extraction system. Provide good
ventilation in the workplace. The use of respiratory
mask with a filter of class P2.
10.1. Inclusion of an aspiration system.
Put a hose nozzle aspiration system (3). Connect
the hose (3) with an aspiration or vacuum system
(some models have an optional adapter for a vacuum
cleaner). Use a vacuum must be appropriate for
work with the material being processed. If at work
pays particular harmful to health or carcinogenic
dust powder, use a specialized vacuum cleaner.
11. Job. with power tools.
Before carrying out any activities unplug the plug
from the power supply network.
11.1. Adjusting the angle of cutting.
For making major cuts in the slope plate (5) can
be tilted left or right to 45 °. Unscrew the screws (10)
and gently move the main plate (5). To establish
accurate gradients of the main shear plate is fixed
at angles 0 °, 22,5 ° and 45 ° left and right. Tilt the
main plate (5) to the desired angle. Random slopes
can be set using a protractor. Then again tighten the
screws (10).
12. Commissioning.
Beware of the voltage of supply network! Supply
voltage of the network must conform to the details
shown on the plate of power. Appliances marked
with 230 V, can be supplied with a voltage of 220 V.
13. Inclusion and exclusion.
To turn the power switch trigger press (2). For
locking of the trigger switch (2) you hold and press
the button (1). Exclusion jig saw release trigger
switch (2). If the trigger switch (2) is anchored, first
press it short and then relax. Using the block button
(1) is comfort in continuous work.
14. Instructions for use.
Cooling-lubricating fluid.
To prevent overheating in the cutting of metals,
should be applied cooling-lubricating fluid along the
line of cutting. Speed of rotation of the saw engine
is adjusted by turning and setting the speed in the
desired position. This allows you to choose the
most suitable speed depending on the performance
properties of the material being processed.
The higher the value indicated on the regulator,
the higher the engine speed of the saw. For a
quick work jig saw is equipped with pendilium (pen)
movements of the sword.
Item 0 - pendilium lack of movement. Used for
hard materials such as plywood and sheet metal.
Item I - for fast cutting of pieces of wood, plastic
and others.
Item II-fast cutting of soft or flexible materials.
15. Maintenance and service.
15.1. Maintenance and cleaning.
Before carrying out any activities jig saw unplug
the plug from the supply network. To work quality
and safety, keep the power vent and clean. Regularly
clean the socket for clamping of the cutting sheets.
For this purpose, the cutting blade and removing
stuck iztraskayte filings by tapping on a stable
basis. Strong contamination of jig saw could lead to
violations of its functioning. Therefore, no cut in the
ceiling or bottom position materials that emit large
amounts of chips and dust.
15.2. In extremely severe working conditions in
cutting of metal on the inner surfaces of the body
may be delayed tokoprovezhdasht powder. This
can disrupt the protective insulation jig saw. In such
cases, it is recommended to use a fixed aspiration