Raider Pro RDP-JS26, Руководство пользователя, Страница: 10 / 76

10 www.raider.bg
General guidelines for safe operation.
Read all instructions carefully. Failure of the
nature following instructions can cause electric
shock, fire and / or severe injuries. Keep these
instructions in a safe place.
1. Safety in the workplace.
1.1. Keep your workplace clean and well lit.
Disarray and poor lighting may contribute to the
occurrence of an accident.
1.2. Do not operate saw jig in an environment
with increased risk of an explosion in the vicinity of
flammable liquids, gases or powders.
During operation of saws Knife separate sparks
that can ignite powders or fumes.
1.3. Keep children and bystanders at a safe
distance while working with a jig saw.
If your attention is diverted, you may lose control
over the jig saw.
2. Safety when working with electricity.
2.1. A jig saw the plug must be suitable for
contact. In no case is allowed to modify the structure
of the plug. When working with electrical zero, do not
use plug adapters.
Using original plugs and sockets reduces the risk
of electric shock.
2.2. Avoid touching your body to earthed bodies,
eg. pipes, heaters, stoves and refrigerators. When
your body is grounded, risk of electric shock is
greater.
Prevent jig saw the rain and moisture. Infiltration
of water into the jig saw increases the risk of electric
shock.
2.3. Do not use a power cord for the purposes
for which it is not provided, eg. to carry a jig saw on
cable or removing the plug from the outlet. Protect
cords from heat, oil, contact with sharp edges or
points of mobile machines.
Damaged or twisted cables increase the risk of
electric shock.
2.4. When working with a chainsaw pierced out,
switch the machine only in installations equipped
with electric switch Fi (safety shut-off switch with
Residual protection), and current leakage, which is
triggered when DTZ must be no more than 30 mA,
according to “Regulation 3 device for the electrical
equipment and power lines. Use only extension,
suitable for outdoor use. Using the extension,
designed for outdoor use reduces the risk of electric
shock.
2.5. If you require the use of jig saw in damp
environment, including the machine only in
installations equipped with electric switch Fi. Use of
such a safety switch utechni currents reduces the
risk of electric shock.
3. Safe way of working.
3.1. Be concentrated, watch their actions carefully
and act cautiously and prudently. Do not use a jig
saw when you are tired or under the influence of
drugs, alcohol or narcotic drugs.
A moment of distraction at work pierced saw may
have the effect of extremely serious injuries.
3.2. Work with protective work clothing and
always with safety glasses.
Wearing Suitable for pierced saw and the
activities of personal protective equipment, such
as respiratory masks, healthy, tightly closed shoes
grapple with a stable, protective helmet and silencers
(hearing protectors), reduces the risk of accident.
3.3. Avoid the danger of incorporating jig saw
inadvertently. Before you turn the plug into the
power supply network, make sure the trigger switch
is in position “off”. If, when you carry a jig saw, keep
your finger on the trigger switch, or if you submit a
jig voltage of a saw, when included, there is the risk
of accident.
3.4. Before turning jig saw, make sure that you
removed it from all utilities. Utilities, forgotten about
moving unit can cause injuries.
3.5. Avoid unnatural positions of the body. Work
in a stable position of the body at any time and keep
the balance. So you can control the jig saw better
and safer if unexpected situations arise.
3.6. Work with appropriate clothing. Do not
operate with loose clothing or ornaments. Keep
your hair, clothes and gloves at a safe distance from
rotating units jig saw. Robes, attire, long hair can be
caught and carried away by rotating units.
3.7. If possible use an external aspiration system,
make sure it is switched on and functioning properly.
Use of the aspiration system reduces the risks due
to the discharge dust at work.
4. Respect to carefully jig saw.
4.1. Do not overload jig saw. Use Knife Saw only
as intended. Will operate better and safer when you
use the right saw stabbed in the manufacturer’s
specified range of load.
4.2. Do not use jigd saw with a starting switch
is damaged. Jigd saw, which can not be excluded
and included as intended by the manufacturer, is
dangerous and should be repaired.
4.3. Before you modify the settings of the jig saw
to replace work tools and additional accessories as
well as a long time when you will not use jig saw,
unplug the plug from the supply network. This
measure eliminates the danger of imposing a jig saw
inadvertently.