REED PPR75, Инструкция по эксплуатации

Страница: 1 / 2

Plastic Pipe Fitting Reamers Operating Instructions
PPR75, PPR100, PPR125, PPR150, PPR200, PPR300, PPR400
1. Shaft
2. Carbide
3. Cap Screw
4. Set Screw
(not shown)
Body
Rotate Carbide Insert:
Carbide insert has four cutting edges. Change cutting
edge by removing the cap screw and rotating the carbide 180° then reinsert cap
screw and tighten. Replace carbide as needed.
¾” - 1” 1-¼” - 4”
Ref. No. Description Item Code Item Code Qty.
1 SHAFT 44525 44524 1
2 CARBIDE INSERT 24523 24524 1
3a 8-32 CAP SCREW — 24525 1
3b 4-40 CAP SCREW 24522 — 1
4 1/4” - 20 SET SCREW 30087 30087 1
Parts List
54521-213
See Also: RP-0113-103
Plastic Pipe Fitting Reamers Operating Instructions
PPR75, PPR100, PPR125, PPR150, PPR200, PPR300, PPR400
1. Shaft
2. Carbide
3. Cap Screw
4. Set Screw
(not shown)
Body
Rotate Carbide Insert: Carbide insert has four cutting edges. Change cutting
edge by removing the cap screw and rotating the carbide 180° then reinsert cap
screw and tighten. Replace carbide as needed.
¾” - 1” 1-¼” - 4”
Ref. No. Description Item Code Item Code Qty.
1 SHAFT 44525 44524 1
2 CARBIDE INSERT 24523 24524 1
3a 8-32 CAP SCREW — 24525 1
3b 4-40 CAP SCREW 24522 — 1
4 1/4” - 20 SET SCREW 30087 30087 1
Parts List
54521-213
See Also: RP-0113-103